Weber Char Broil Grill Parts You Should Know About


Many more Americans are into recycling these days and saving something that is older is a good idea. There are now several different Weber Char Broil Grill Parts offered in order to replace parts that are either broken or not functioning properly due to the wear and tear of time. These pieces that will save a grillers machine from the landfill can be found online or in special hardware stores.

The heat plates seem to be the most often requested item for replacement in any of the series of gas grills. A Heat Plate #7000045 for the Char-broil grill is a large 11 3/4″ x 5 5/8″ which could be swapped out for the original factory heat plate. Sometimes they are referred to as ‘flame tamers’ and different models have either three or four each. A box of three or four could be discounted at many different businesses.

There are a number of stainless steel style heat plates, model number CBHP1 Char-broil S/S that will measure 11 3/4″ x 5 5/8″ and replaces many different kinds of burners. The Advantage and the Performance series of charbroil grills have a deal for a four pack of these heat plates which is the heating element are built to last.

Another component that grill owners need quite often is Char-Broil burner carryover tube part number 7000277 that will fit over burners CBP1 and CBPCI as well as the heat plate or flame tamer 700045. One other unit this carryover burner tube could be used on is the Char-broil Performance grill 461350805 model.

In addition to the grill pieces, there are cooking units that are easily attached to a gas cooking machine to enhance its performance. There is a cook grid set that is used in various barbeque machines and will become a substitute for models 80005724 and 80005665. This piece will also fit the MCM 66652, the Uniflame, Kenmore and Thermos grill machines and the Char-broil G515-0059-W1. It is model number 66652, the Char-broil Porcelain cast iron cook grid two piece set. It measures 18 1/4″ x 13 1/8″ each piece which means totally it has a measurement of 18 1/4″ x 26 1/4″.

At present there are over 30 Performance models that the model 7000181 Char-broil warming rack will fit on. There are times when the rest of the dinner isn’t ready and one needs to keep the grilled meat or other items warm until things are prepared. There are only two separate models for the Advantage series grills.

For those people who are taller or who simply don’t like to lean over, there are the extender legs for giving the Char-broil grill a little ‘lift’. A set of two, model number 7000230 are used in well over 45 unique models of Performance series and only four models in the Advantage grills.

There are so many different Weber Char Broil Grill parts for various unique grilling machines that for a good fit, it is important for one to check with the owners manual first. Some of the replacement pieces are needed because the machines have been used over and over again, which is a good thing. There are other times new piece to the barbeque machine is required because of damage due to wind, rain or other natural type storms if the machines are left out in the elements.


Source by Jacob Akshire

One thought on “Weber Char Broil Grill Parts You Should Know About

Leave a Reply

Your email address will not be published. Required fields are marked *